UNDERGROUND MINING
Original Paper
UDC 621.55.33 © D.K. Asmagambet, G.D. Buyalich, G.S. Zhettesova, K.M. Beisembayev,Zh.T. Akizhanova, 2023
ISSN 0041-5790 (Print) • ISSN 2412-8333 (Online) • Ugol’ – Russian Coal Journal, 2023, № 6, pp. 55-60
DOI: http://dx.doi.org/10.18796/0041-5790-2023-6-55-60
Title
INVESTIGATION OF THE ROTARY SYSTEM FOR REMOVING CHAMBERS
Authors
Asmagambet D.K.1, Buyalich G.D.2, Zhettesova G.S.1, Beisembayev K.M.1, Akizhanova Zh.T.1
1 NJSC Karaganda Technical University named after A. Saginov, Karaganda, 100017, Kazakhstan
2Kuzbass State Technical University, Kemerovo, 650000, Russian Federation
Authors Information
Asmagambet D.K., Doctoral student of the Department of Technological equipment, mechanical engineering and standardization, e-mail: kenzhebaeva_d@mail.ru
Buyalich G.D., Doctor of Engineering Sciences, Professor, e-mail: gdb@kuzstu.ru
Zhettesova G.S., Doctor of Engineering Sciences, Professor, e-mail: zhetesova@mail.ru
Beisembayev K.M., Doctor of Engineering Sciences, Professor of the Department of Technological Equipment, Mechanical Engineering and Standardization, e-mail: Kakim08@mail.ru
Akizhanova Zh.T., Doctoral student of the Department of Mineral Deposit Development, e-mail: zhanar_1988@inbox.ru
Abstract
When developing mining machines, their manufacturability, which determines the manufacture, assembly, repair, reliability of operation and modernization, is of particular importance. Thus, mechanized complexes are known that have been in operation for over 30 years. Their improvement is made by embedding in the design of automation systems and computer programs. The expansion of the scope is also achieved through new production schemes. In KuzGTU and KarTU, chamber technologies have been developed with a non-assembly transition of the face from site to site. A scraper turning conveyor is used to transport coal in the chamber. The control system is developed on the basis of databases of multidimensional classifications with modeling of the interaction of parts, calculation of reliability, assembly and cost of work. It has downhole state prediction modules based on Ansys and Adams packages and experimental data recording devices.
Keywords
Manufacturability, Camera, Difficult conditions, Maneuvering, Infological scheme, Database.
References
1. Zhetesova G.S., Beysembaev K.M., Malybaev N.S. et al. Development of the basic technology for mining of minerals with turning. Izvestiya Tomskogo politehnicheskogo universiteta. In?iniring georesursov, 2018, (8), pp. 37-49. (In Russ.).
2. Isabek T.K., Kamarov R.K. & Mukhamedjanov S.D. Regarding the challenge of mining local areas of coal seams in the Karaganda coal basin. Vestnik Nacional?noj akademii gornyh nauk, 2018, (2), pp. 14-20. (In Russ.).
3. Nosov D.A., Fatykhov T.T., Yel'kin A.A. et al. Mechanization of mining operations at the mines of the Verkhnekamskoye salt deposit. Gornyj zhurnal, 2021, (4), pp. 11-16. (In Russ.).
4. Gaofeng Song, Yoginder Chugh & Jiachen Wang. A numerical modelling study of longwall face stability in mining thick coal seams in China. Int. J. of Mining and Mineral Engineering, 2017, Vol. 8, (1), pp. 35-55.
5. Beysembayev K.M., Malybayev N.S., Tutanov S.K. et al. Development of the longwall model for the closed-loop control system of the powered roof support. Gornyj zhurnal, 2019, (8), pp. 38-43. (In Russ.)
6. Govorukhin Yu.M., Rib S.V., Nikitina A.M. et al. Numerical modeling of roof collapse processes. Gornyj zhurnal, 2019, (4), pp. 23–26. (In Russ.)
7. ?ukasz BO?OZ1A. Dynamic model of a longwall shearer with a chain haulage system. Acta Montanistica Slovaca, 2022, Vol. 27, (3), pp. 589-606.
8. Shuang Wang, Deyong Li & Kun Hu. Analysis and Experimental Study on Pressure Characteristics of Supporting Roller Group of Pipe Belt Conveyor. Hindawi Shock and Vibration Volume, 2019, Article ID 7061847, pp. 1-7
9. Lysenko M.V., Aushev E.V. & Dudin А.А. Ways to increase the recovery ratio of coal reserves. Ugol’, 2022, (11), pp. 48-54. (In Russ.). DOI: 10.18796/0041-5790-2022-11-48-54.
10. Edward Samuel Efretuei, Idowu Iyabo Olateju, John Olusoji Owolabi & Abdulwahab Giwa. Modelling and simulation of an adsorption process using activated carbon from coconut shells. A ARPN Journal of Engineering and Applied Sciences, May 2022, Vol. 17, (9), pp. 932-946.
11. S?awomir Bartoszek, Sebastian Jendrysik, Joanna Rogala-rojek, Mariusz Woszczy?ski, Krzysztof Krauze & Jaros?aw Joostberens. State-of-the-art ultrasonic sensor designed to improve longwall production rates and operation safety. Acta Montanistica Slovaca, 2021, Vol. 26, (1), pp. 149-160.
12. Liaquat Ali Khan, Muhammad Faizan Shah, Muhammad Ramiz & Kamran Nazir. Kinematics and singularity analysis of 3-PRS parallel kinematic mechanism. ARPN Journal of Engineering and Applied Sciences, 2022, Vol 17, (8), pp. 849 - 857
13. Beysembayev K.M. Demo development of autocontrol base elements. Sovremennye naukoyomkie tehnologii, 2015, (9), pp. 9-13. (In Russ.).
For citation
Asmagambet D.K., Buyalich G.D. Zhettesova G.S., Beisembayev K.M. & Akizhanova Zh.T. Investigation of the rotary system for removing chambers. Ugol’, 2023, (6), pp. 55-60. (In Russ.). DOI: 10.18796/0041-5790-2023-6-55-60.
Paper info
Received March 9, 2022
Reviewed May 10, 2023
Accepted May 26, 2023
