UNDERGROUND MINING
Original Paper
UDC 622.281(574.32) © G.D. Tanekeyeva, Е.A. Abeuov, D.R. Makhmudov, R.A. Musin, A.Yu. Balabas, 22023
ISSN 0041-5790 (Print) • ISSN 2412-8333 (Online) • Ugol’ – Russian Coal Journal, 2023, № 2, pp. 31-33
DOI: http://dx.doi.org/10.18796/0041-5790-2023-2-31-33
Title
STUDY OF THE GEOMECHANICAL CONDITIONS FOR CARRYING OUT AND MAINTAINING SURFACE MINE WORKINGS
Authors
Tanekeyeva G.D.1, Abeuov Е.A.1, Makhmudov D.R.2, Musin R.A.1, Balabas A.Yu.1
1 Abylkas Saginov Karaganda technical university, Karaganda, 100027, Republic of Kazakhstan
2I. Karimov Tashkent state technical university, Tashkent 100095, Republic of Uzbekistan
Authors information
Tanekeeva G.D., PhD Doctoral student, e-mail: tanekeeva77@mail.ru
AbeuovЕ.A., PhD (Engineering), Associate Professor, e-mail: ercebulan69@mail.ru
Makhmudov D.R., Doctor PhD, Associate Professor, e-mail: dmahmudpov@yandex.ru
Musin R.A., PhD, Acting Associate Professor, e-mail: R.A.Mussin@mail.ru
Balabas A.Yu., PhDDoctoral student in "Mining", e-mail: 19chinatown@mail.ru
Abstract
The improvement and introduction of advanced technology and means of fixing mine workings with justification of their optimal parameters based on the consideration of the stress-strain state of the host rocks will reduce material and labor costs during their operation.When working off coal seams during the periods of cleaning operations in the zones of reference (increased) rock pressure while maintaining the cut-off workings ahead of the lavas, the intensity of stresses and deformations and the duration of downtime of long cleaning faces sharply increases. The associated production losses reach 20-25% or more, the ash content of coal and the danger of miners' labor increases. Studies of the patterns and features of deformation of the rock mass, around the contour of the supported prisechny mine workings on the ventilation horizon when excavating the worked column below the previously worked one with the establishment of reliable fastening parameters, are important.
Keywords
Underground mine workings, Stresses, Deformations, Fastening parameters, Geomechanical processes, Anchorage, Technological schemes of fastening, Stability of rock outcrops, Heaving of the soil of the workings, Mining factors, Carboniferous massif, Contour of mining, Convergence.
References
1. Shashenko A.N., Solodyankin A.V. & Martovitsky A.V. Stability management of extended workings of deep mines. Dnepropetrovsk, Lizunov Press Publ., 2012, 384 p.
2. Bondarenko V.I., Kovalevskaya I.A., Simanovich G.A., Koval A.I. & Fomichev V.V. Experimental studies of the stability of repeatedly used excavation workings on the shallow layers of Donbass. Dnepropetrovsk, Lizunov Press Publ., 2012, 426 p.
3. Bondarenko V.I., Kovalevskaya I.A., Simanovich G.A., Svistun R.N. & Snigur V.G. Analytical and experimental studies of increasing the stability of excavation workings and calculation of the parameters of the fastening system. Dnepropetrovsk, Lizunov Press Publ., 2013, 178 p.
4. Kovalevs'ka I., Vivcharenko O. & Snigur V. Specifics of percarbonic rock mass displacement in longwalls end areas and extraction workings. Materials of VII International scientific-practical conference “School Underground Mining” / “Mining of Mineral Deposits”.Netherlands, CRC Press/Balkema, 2013, pp. 29–33.
5. Kirichenko V.Ya. Metal-frame drift supports of a new technical level. Materials of the IV International scientific and practical conference "School of Underground Mining". Dnepropetrovsk, Lizunov Press Publ., 2010, pp. 241–266.
6. Demin V.F., Shontayev D.S., Balgabekov T.K., Shontayev A.D. & Kongkybayeva A.N. Stressed-deformed state of the boundary-carbon array. Ugol’, 2020, No. 5, pp. 63-67. (In Russ.). DOI: 10.18796/0041-5790-2020-5-63-67.
7. Demin V.F., Yavorsky V.V., Musin R.A., Demin V.V. & Demina T.V. Efficiency of using the geomechanical system "Rock mass-anchoring" to improve the stability of mine workings. Ugol’, 2014, (2), pp. 18-21. Available at: http://www.ugolinfo.ru/Free/022014.pdf(accessed 15.01.2023). (In Russ.).
8. Demin V.F., Aliev S.B., Mausymbaeva A.D., Demina T.V. & R.K. Kamarov. Displacement of the contours of development workings during geomechanical processes. Ugol’, 2013, (4), pp. 69-72. Available at: http://www.ugolinfo.ru/Free/042013.pdf(accessed 15.01.2023). (In Russ.).
9. Demin V.F., Demina T.V., Kainazarov A.S. & Kainazarova A.S. Evaluation of the effectiveness of the application of technological schemes for conducting mine workings to improve the stability of their contours. Sustainable development of mountain territories, 2018, Vol. 10, (4), pp. 606-616.
10. Demin V.F., Khalikova E.R., Demina T.V. & Zhurov V.V. Study of the influence of tectonic disturbances in the occurrence of a coal seam on the parameters of fastening mine workings with anchor bolting. Scientific Herald of the NSU (Dnepropetrovsk, Ukraine), 2019, (5), pp. 16-22.
For citation
Tanekeyeva G.D., Abeuov Е.A., Makhmudov D.R., Musin R.A. & Balabas A.Yu. Study of the geomechanical conditions for carrying out and maintaining surface mine workings.Ugol’, 2023, (2), pp. 31-33. (In Russ.). DOI: 10.18796/0041-5790-2023-2-31-33.
Paper info
ReceivedDecember 1, 2022
Reviewed December 10, 2022
Accepted January 26, 2023
